Xineron HEM171BP, Инструкция по эксплуатации

Страница: 12 / 16

4.3. HDMI Mode
Press the MENU button to display the HDMI menu. The follow setup menu will appears.
● HDMI menu
HDMI
Contrast 58
Brightness 51
Tint 50
Color 62
Sharpness 12
Panel scale < 16:9 >
• Contrast, Brightness
Change the contrast & brightness according to personal preference.
• Tint
Adjusts all the colors on the screen, but is most noticeable to the eye in reds and yellows,
And is also usually set for pleasing face tones. (Appears in NTSC mode only)
• Color
Used to minutely adjust color.
• Sharpness
Sets the desired sharpening enhancement to the picture.
• Panel Scale
Change the scale. (16:9, Full)
● Advanced Menu
Advanced
Color Temp >
Alarm >
3D NR MID >
Anti Burn < OFF >
Energy Saving < OFF >
Recall >
Source
< HDMI >
• Color Temp is used to control color temperature. (Normal, Warm, Cool, User)
• Alarm is input for the alarm level (Max 5Vdc) of sensor or any alarm device.
• 3D NR reduce the noise in the picture due to poor reception or poor picture quality. (Off/Low/Middle/High)
• Anti Burn disable.
• Energy Saving change the display backlight. (OFF, Medium, Maximum)
When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal
and the power consumption is reduced.
• Reca ll the monitor original factory setting.
• Source selects between the CVBS (Composite INPUT), RGB (PC INPUT), DVR or HDMI to be displayed.
12
• Note : Not support HDCP (High-bandwidth Digital Content Protection) compliance.