Operation Instruction
Chapter 3
3.1 General Problems and Trouble-shootings
Problem
Possible cause
Trouble-shootings
t
he machine is
not electrified
Power connector not plug well
Fuse has fused
Plug the power connector again.
Change the fuse coincide with the prompt
requirement.
Speaker no
sound
Sound source turned off
Signal cable is broken
Signal selector switch wrong
Root noise of sound source too big
Signal shielding effect badly
Signal source input phase opposed
Speaker wire to channels has exchanged or
positive negative reversed
Speaker cable is broken
Noise too big
Left and
right channel
confused
Turn on the sound source.
Check and change signal cable.
Check and change speaker cable.
Change a higher SNR sound
.
Tune input selection button according to
sound source
.
Connect according to the indication of left
and right channel.
Change eligible signal cable
Notice: if you have been confronted any problems when using this product or have any suggestion to tell us, please
send E-mail to [email protected] or visit the xindak website: http://www.xindak.com.
4
Содержание PA-M
Страница 1: ...Class A Power Amplifier PA M INSTRUCTIONS...
