5. Configure the Primary Setup screen.
• You need the data supplied by your ISP.
• Select the correct connection method, and enter the data provided by your ISP.
• If using the PPTP connection method:
• Set Connection Type to Static IP or Dynamic IP, as appropriate, according to the IP
address method used by your ISP.
• Ensure you have checked the PPTP Connection checkbox, and entered the IP address
of the PPTP server.
• Save your changes.
6. Basic configuration of the Twin WAN Router is now complete.
Step 3: Configure PCs on your LAN
1. Restart each PC so that it will obtain an IP address from the Twin WAN Router.
Page 2
2. Configure your PCs to use the Twin WAN Router for Internet access, as described below.
For Windows 9x/2000
1. Select Start Menu - Settings - Control Panel - Internet Options.
2. Select the Connection tab, and click the Setup button.
3. Select "I want to set up my Internet connection manually, or I want to connect through a local
area network (LAN)" and click Next.
4. Select "I connect through a local area network (LAN)" and click next.
5. Ensure all of the boxes on the following Local area network Internet Configuration screen are
unchecked.
6. Check the "No" option when prompted "Do you want to set up an Internet mail account now?”
7. Click Finish to close the Internet Connection Wizard. Setup is now completed.
For Windows XP
1. Select Start Menu - Control Panel - Network and Internet Connections.
2. Select Set up or change your Internet Connection.
3. Select the Connection tab, and click the Setup button.
4. Cancel the pop-up "Location Information" screen.
5. Click next on the "New Connection Wizard" screen.
6. Select "Connect to the Internet" and click next.
7. Select "Set up my connection manually" and click next.
8. Check "Connect using a broadband connection that is always on" and click next.
9. Click Finish to close the New Connection Wizard. Setup is now completed.
