XIMEA xiQ series страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 113

background image

xiQ - Technical Manual Version 1.35

2

1.

Introduction

1.1.

About This Manual

Dear customer,
Thank you for purchasing a product from XIMEA.
We hope that this manual can answer your questions, but should you have any further questions or if you wish to claim a
service or warranty case, please contact your local dealer or refer to the XIMEA Support on our website:

www.ximea.com/support

The purpose of this document is to provide a description of the XIMEA xiQ-Series cameras and to describe the correct way to
install related software and drivers and run it successfully. Please read this manual thoroughly before operating your new
camera for the first time. Please follow all instructions and observe the warnings.
This document is subject to change without notice.

1.2.

About XIMEA

XIMEA is one of the worldwide leaders for innovative camera solutions with a 25-year history of research, development and
production of digital image acquisition systems. Based in Slovakia, Germany and the US and with a global distributor network,
XIMEA offers their cameras worldwide. In close collaboration with customers XIMEA has developed a broad spectrum of
technologies and cutting-edge, highly competitive products.
XIMEA's camera centric technology portfolio comprises a broad spectrum of digital technologies, from data interfaces such as
USB 2.0, USB 3.1 and PCIe to cooled digital cameras with CCD, CMOS and sCMOS sensors, as well as X-ray cameras.
XIMEA has three divisions – generic machine vision and integrated vision systems, scientific imaging and OEM/custom.
XIMEA cameras find use in many industrial applications, such as motion control, robotics, or quality control in manufacturing.
The broad spectrum of cameras also includes thermally stabilized X-ray cameras, and specialty cameras for medical
applications, research, surveillance and defense.

1.2.1.

Contact XIMEA

XIMEA is a worldwide operating company

Headquarters
Sales worldwide
XIMEA GmbH
Am Mittelhafen 16
48155 Münster
Germany
Tel: +49 (251) 202 408-0
Fax: +49 (251) 202 408-99

Sales America

XIMEA Corp.
12600 W Colfax Ave., Suite A-130
Lakewood, CO 80215
USA
Tel: +1 (303) 389-9838
Fax: +1 (303) 202-6350

R&D, Production

XIMEA s.r.o.
Lesna 52
900 33 Marianka
Slovakia

Internet

General inquiries

[email protected]

Sales

[email protected]

Support

https://www.ximea.com/support/wiki/allprod/Contact_Support

«
1
2
3
4
...
»

Содержание xiQ series


















































































































Отзывы:

Нет отзывов

Похожие инструкции для xiQ series

Бренд: Panasonic Страницы: 15

Бренд: Olympus Страницы: 69

Бренд: Conrad Страницы: 8

Бренд: FourStar Страницы: 11

Бренд: Zavio Страницы: 13

Бренд: SOMFY Страницы: 40

Бренд: Commax Страницы: 8

Бренд: InterTest Страницы: 20

Бренд: Ikegami Страницы: 52

Бренд: BELL+HOWELL Страницы: 3

NightHawk 26-0900

Бренд: Bushnell Страницы: 2

Бренд: Olympus Страницы: 162

Бренд: Gator Страницы: 16

Бренд: Vivitar Страницы: 54

Бренд: Blaupunkt Страницы: 61

Бренд: Radio Shack Страницы: 2

Tele converter 2.0

Бренд: Tamron Страницы: 3

Бренд: GeoVision Страницы: 175

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды