Mechanical - dimensions and mounting
Rear side mounting, heatsink notes
1
2
3
4
1
2
3
4
Four mounting points M4 on the heatsink.
Four mounting points M3 on the rear panel.
Y
Max. depth of the screws is 6mm.
Y
Max. depth of the screws is 6mm.
Y
Max. screws torque is 1.3 N-m @ 5.5mm screw depth
Y
Max. screws torque is 0.5 N-m @
5.5mm screw depth
Bottom View with heatsink attached
Rear View without heatsink
Dimensions & Mounting points positions
Bottom View with heatsink attached
Mounting points positions
Heatsink use, installation and precautions.
Continuos operation above 45°C ambient temperature at full
CPU load requires use of heatsink.
Heatsink kit comes with the heatsink itself, four M3x8 mount-
placed on the heatsink and protected by transparent plastic
attachment of the heatsink by four screws to the back panel of
the device.
Y
Max. screws torque is 0.5 N-m.
www.ximea.com
CURRERA R-Series - Hardware Guide Q1 2013
Page 14
