Xilinx VCU110 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 48

Xilinx VCU110 Скачать руководство пользователя страница 2

© Copyright 2016 Xilinx, Inc. All Rights Reserved.

XILINX, the Xilinx logo, the Brand Window and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of

their respective owners.

NOTICE OF DISCLAIMER: The information disclosed to you hereunder (the “Information”) is provided “AS-IS” with no warranty of any kind, express or implied.

Xilinx does not assume any liability arising from your use of the Information. You are responsible for obtaining any rights you may require for your use of this

Information. Xilinx reserves the right to make changes, at any time, to the Information without notice and at its sole discretion. Xilinx assumes no obligation to

correct any errors contained in the Information or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical

support or assistance that may be provided to you in connection with the Information. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS,

IMPLIED, OR STATUTORY, REGARDING THE INFORMATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS.

Revision History

Date

Version Description

02/03/16

2.1

Added details on resetting Tera Term.

01/28/16

2.0

Updated for 2015.4 for ES3 Silicon.

11/20/15

1.2

Modified to match VCU110 Kit hardware.

10/22/15

1.1

Added ExaMax and Interlaken setup.

10/06/15

1.0

Initial version.

«
1
2
3
4
...
»

Содержание VCU110

















































Отзывы:

Нет отзывов