Xilinx VC707, Начало работы

Страница: 7 / 24

Getting Started with the VC707 Evaluation Kit www.xilinx.com 7
UG848 (v1.4.1) October 14, 2015
Preliminary Setup
3. Open the host computer Device Manager ( Figure 1-2 ). In the Windows task bar, Click
Start , click Control Panel , and then click Device Manager .
4. Open UART properties. Expand Ports (COM & LPT) , right-click Silicon Labs
CP210x USB to UART Bridge , and then click Properties .
5. In the properties window, select the Port Settings tab, verify the settings match the
values shown in Figure 1-3 and then click Advanced .
X-Ref Target - Figure 1-2
Figure 1-2: Device Manager
X-Ref Target - Figure 1- 3
Figure 1-3: Port Settings
UG 8 4 8 _c1_02_071712
UG848_c1_03_071112
Send Feedback