Getting Started with the VC707 Evaluation Kit
5
UG848 (v1.4.1) October 14, 2015
Chapter 1
Getting Started with the Virtex-7 FPGA
VC707 Evaluation Kit
Introduction
This document describes how to use the materials provided in the VC707 Evaluation Kit to
set up the VC707 board and a host computer to run two reference designs, which test and
demonstrate some of the key features of the XC7VX485T FPGA and the VC707 board:
•
Built-in self test (BIST)
•
Analog mixed signal (AMS) card demonstration
Note:
These design summaries are for use as a quick start method for users who are familiar with
Xilinx tools, technology, and reference designs. Additional instructions and background information
are available from the
VC707 Evaluation Kit Contents
The VC707 Evaluation Kit includes:
•
VC707 board with the Virtex®-7 XC7VX485T FPGA
•
ISE® Design Suite: Logic Edition (full seat, node-locked, device-locked to the
XC7VX485T FPGA)
•
Vivado® Design Suite Installation DVD
•
Printed entitlement voucher: provides entitlement of the Vivado Design Suite Logic
Edition, node-locked, and device-locked to the XC7VX485T FPGA. Follow the
printed instructions on the voucher to redeem your software entitlement.
•
AMS101 evaluation card
•
USB cable, standard-A plug to mini-B plug
•
USB cable, standard-A plug to micro-B plug
•
HDMI™ cable, type-A plug to type-A plug
•
Power Supply: 100 VAC–240 VAC input, 12 VDC 5.0A output
•
Power cords to support three main plug types
•
Getting Started Guide
Содержание VC707
Страница 24: ...Printed in Singapore...
