Xilinx SP605, Руководство пользователя по оборудованию

Страница: 2 / 70

SP605 Hardware User Guide www.xilinx.com UG526 (v1.9) February 14, 2019
© Copyright 2009–2019 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Zynq, and other designated brands included
herein are trademarks of Xilinx in the United States and other countries. All other trademarks are the property of their respective owners.
DISCLAIMER
The information disclosed to you hereunder (the “Materials”) is provided solely for the selection and use of Xilinx products. To the maximum
extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS ALL
WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether
in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any kind or nature related to, arising
under, or in connection with, the Materials (including your use of the Materials), including for any direct, indirect, special, incidental, or
consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or damage suffered as a result of any action
brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx had been advised of the possibility of the same.
Xilinx assumes no obligation to correct any errors contained in the Materials or to notify you of updates to the Materials or to product
specifications. You may not reproduce, modify, distribute, or publicly display the Materials without prior written consent. Certain products are
subject to the terms and conditions of Xilinx’s limited warranty, please refer to Xilinx’s Terms of Sale which can be viewed at
https://www.xilinx.com/legal.htm#tos ; IP cores may be subject to warranty and support terms contained in a license issued to you by Xilinx.
Xilinx products are not designed or intended to be fail-safe or for use in any application requiring fail-safe performance; you assume sole risk
and liability for use of Xilinx products in such critical applications, please refer to Xilinx’s Terms of Sale which can be viewed at
https://www.xilinx.com/legal.htm#tos .
AUTOMOTIVE APPLICATIONS DISCLAIMER
AUTOMOTIVE PRODUCTS (IDENTIFIED AS “XA” IN THE PART NUMBER) ARE NOT WARRANTED FOR USE IN THE DEPLOYMENT
OF AIRBAGS OR FOR USE IN APPLICATIONS THAT AFFECT CONTROL OF A VEHICLE (“SAFETY APPLICATION”) UNLESS THERE
IS A SAFETY CONCEPT OR REDUNDANCY FEATURE CONSISTENT WITH THE ISO 26262 AUTOMOTIVE SAFETY STANDARD
(“SAFETY DESIGN”). CUSTOMER SHALL, PRIOR TO USING OR DISTRIBUTING ANY SYSTEMS THAT INCORPORATE PRODUCTS,
THOROUGHLY TEST SUCH SYSTEMS FOR SAFETY PURPOSES. USE OF PRODUCTS IN A SAFETY APPLICATION WITHOUT A
SAFETY DESIGN IS FULLY AT THE RISK OF CUSTOMER, SUBJECT ONLY TO APPLICABLE LAWS AND REGULATIONS GOVERNING
LIMITATIONS ON PRODUCT LIABILITY.
Revision History
The following table shows the revision history for this document.
Date Version Revision
10/07/09 1.0 Initial Xilinx release.
11/09/09 1.1 • Updated Figure 1-17 and Figure 1-23 .
• Changed speed grade from -2 to -3.
• Miscellaneous typographical edits.
02/01/10 1.1.1 Minor typographical edits to Table 1-24 and Table 1-25 .
05/18/10 1.2 Updated Figure 1-2 . Added Note 6 to Table 1-11 . Updated board connections for
SFP_TX_DISABLE in Table 1-12 . Added note about FMC LPC J63 connector in 18. VITA
57.1 FMC LPC Connector . Updated U1 FPGA Pin column for FMC_LA00_CC_P/N in
Table 1-28 . Updated description of PMBus Pod and TI Fusion Digital Power Software
GUI in Onboard Power Regulation . Updated Appendix B, VITA 57.1 FMC LPC
Connector Pinout , and Appendix C, Xilinx Design Constraints .
06/16/10 1.3 Updated 2. 128 MB DDR3 Component Memory . Added note 1 to Table 1-30 .
09/24/10 1.4 Updated description of Fusion Digital Power Software in Onboard Power Regulation .
02/16/11 1.5 Revised oscillator manufacturer information from Epson to SiTime in Table 1-1 . Revised
oscillator manufacturer information from Epson to SiTime on page page 26 . Deleted note
on page 44 referring to J55: “Note: This header is not installed on the SP605 as built.”
Revised values for R50 and R216 in
Figure 1-12 . Revised oscillator manufacturer
information from Epson to SiTime on page page 69 .