Solarflare X2552 network adapter Quick Start Guide
Issue 1
© Copyright 2019 Xilinx, Inc
5
1.2 Installing the adapter
The X2552 SFP28/SFP+ dual-port adapter is a Type 2 OCP adapter. It complies with
the
OCP Mezzanine card 2.0 Design Specification
, using the form factor from the
v0.5 standard with 8mm stacking. It is compatible with Intel OCP servers.
CAUTION:
Servers contain high voltage electrical components. Before removing the
server cover, disconnect the mains power supply to avoid the risk of electrocution.
Before handling computer components, discharge static electricity from yourself by
touching a metal surface, or wear a correctly fitted anti-static wrist band.
Inserting the adapter in the mezzanine slot
Shut down the server and unplug it from its power source. Remove the server cover
to access the mezzanine slot in the server. Locate the mezzanine slot and its
associated port holes (refer to the server manual if necessary). Insert the SFP+ cages
of the Solarflare server adapter through the port holes, then seat the adapter in the
mezzanine slot. Secure the adapter to the standoffs.
CAUTION:
The X2552 adapter must have sufficient air flow cooling.
Server cooling
fans must be fully operative to prevent damage to the adapter.
Cables and transceivers
For a full list of supported cables and transceivers visit
