Xilica Audio Design XP 4080, Руководство пользователя, Страница: 27 / 30

27
NOTE: The user must power cycle the unit for this setting to take effect.
DEVICE ID
This control assigns a device ID from 1 to 16 to the unit.
BAUD RATE Sets the baud rate of the serial communication. XConsole uses a Baud rate of
115200. This should be left unchanged for most users.
NETWORK
ID
This control assigns a network ID from 0 to 60000 to the unit. The ID is used for
future network expansion only. Please leave this at 0.
Communication Settings
SYSTEM Comm
DEVICE ID: 1
SYSTEM Comm
BAUD RATE: 115200
SYSTEM Comm
NETWORK ID: 0
The password is four characters in length. The factory default of a new unit does not require a
password. The device can be protected for unauthorized parameters and/or system abuse. The
security settings can be controlled and stored in the device with the XConsole GUI only. When
the correct password is entered in the device, all the locks are disabled. After re-entering the
password or power cycling the device, the locks are automatically enabled again.
Security Lock and Unlock
SYSTEM Secure
PASSWORD:________