Xilica Audio Design SOLARO XIO 16, Руководство пользователя

Страница: 6 / 24

6
Opening the Device
Power down the unit before opening the device! Disconnect the power supply.
To open the device cover, locate the four (4) screws located on the sides of the device.
Using a Philips screwdriver, remove each screw located on the sides of the device. (4 screws)
Place loose screws in a safe and dry place.
Lift the top plate of the device and slide the plate out.
Once you are done configuring your device, line up the top plate with the device and slide the
plate back onto the device.
Secure the four (4) screws back into place. The screws should fit easily.
Do not apply excessive force to secure screws. If you are having trouble securing the top plate,
check the alignment of your modular cards.
Remove Plug-in Cards
When handling modular cards, please handle with care. The connectors are fragile. Do not apply
excessive force. Never pull straight up or push straight down .
To remove plug-in cards, place your fingers on the front and back of the modular card. Using a
rocking motion, gently lift each side of the modular card until the card is removed.
Keep loose modular cards protected in a safe and dry place.
Insert Plug-in Cards
When handling modular cards, please handle with care. The connectors are fragile. Do not apply
excessive force. Never pull straight up or push straight down.
To insert plug-in cards, hold the front and back of the modular card. With the connectors pointing
downwards, line up the card connectors with the pinholes in the empty card slot.
Using a rocking motion, push gently on each side of the modular card until the card is secured in
place.
Configuring Card Slots
WARNING!
Power down the unit before opening the device!
Disconnect the device’s power supply.