Panel Description
Installation Guide
Application Connection Diagram
Models Description
!
(
Please install to the supported devices)
Installation
Please confirm the following things before installation:
1. If the POE port meets the power requirement of the connecting devices.
2. If the POE standard requirement and power supply matches with the power receiving device
(1/2+
、
3/6-( End -span)/ 4/5+
、
7/8-(Mid-span))
3 .If the output power of the matched power adapter is compatible with the specification in the
label of the POE switch
Please install the POE switch according to the following steps:
1.
Put the PoE switch on the surface of a large and stable table, or professional installation ra
c
k mount.
2.
Connect Positive, Minus and Earth terminals as indicators on the power adapter.
3.
Connect the network devices to the POE switch port though network cable.
1.Please do not put heavy products on the POE switch, and please ensure good ventilation
environment for the POE switch.
2.Please cut off the power first before plugging the power adapter.
Power
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically
initialize, and LED lights status will display as following:
1. Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which
means the system restoration is successful.
2. Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!
Note
Note
：
Please confirm that the all PoE ports of PD devices are complying with IEEE802.3af/at standard.
!
Power
: 48 VDC (46 ~57VDC),(More than 50VDC recommended when used PoE+ output)
PoE Port
: The PoE ports support PoE function, which can transmit data and power simultaneously if connected
matching device. The LED lights on the front panel can show working status of each port.
Indicator
Status
Description
System Indicator: SYS
Green LED Blink System work as normal (POE33108PFM only)
PoE
Indicator:
PoE
Link Indicator: Link
Green LED OFF
System abnormal or power off
Green LED ON
Connected PD device, powering properly
Green LED Blink
Short circuit or current overload
Green LED OFF
No connected PD or power off
Yellow LED ON
Data transmission properly
Yellow LED Blink
Connection is OK and data is being sent and received
Yellow LED OFF
No connected device
Green LED ON
Green LED Blink
Green LED OFF
Data transmission properly
Connection is OK and data is being sent and received
No data connected
SFP Uplink Indicator
Green LED ON
System work as normal (POE33108PF only)
WA
N
W
ide
Are
a N
etw
ork
G9
G10
CONSOLE
F
F
115200,N,8,1
G1
G3
G5
G7
G2
G4
G6
G8
PoE
08
Pow
er
No
n-P
oE I
P C
am
era
Cat
.5e
/6
Cat
.5e
/6
PoE (
dat
a+
po
we
r)
POE08:
Ethernet unmanaged PoE switch,8x 10/100/1000M RJ45,PoE ports
+
2x 100
/
1000M SFP slots,
1-8 ports support PoE, IEEE 802.3af, RJ45 ports transmission distance, is 100 meters, transmission distance
of optic fiber port with SFP module can be up to 2-120KM.
Cat
.5e
/6
POE 08
Power over Ethernet Switch
8 Ports 10/100/10 2G SFP PoE Switch
