6.3 System
Menus
The
System Menus
allow the user to control and change parameters that
are related to the system behavior and general operation. It can be
accessed by pressing the
Sys
key in the main menu (when no Input/Output
or System Menu is activated). All System Menus require the Enter key to
be pressed for the selected action.
Recall - Program Recall
The DCP-3060 has a built in non-volatile memory that can store up to 30
different program setups. A program can be recalled using this menu.
•
PROG - Program Number to be recalled. Only first 8 characters of
the program name is displayed.
O1:XXXXXX Recall
PROG:01 XXXXXXXX
Store - Program store
The DCP-3060 has a built in non-volatile memory that can store up to 30
different program setups. A program can be stored using this menu. The
old program with the same program number will be replaced. Once the
program is stored in the flash memory, it can be recalled at a later time,
even after power down.
•
PROG - Program Number for the current data to be stored.
O1:XXXXXX Store
PROG:01
•
NAM - Program Name, allows a maximum length of 12 characters.
O1:XXXXXX Store
NAM:XXXXXXXXXXXX
DCP-3060 User's manual - Page 17
