16
Multifunctional operation
Operation methods:
1.
Function buttons in the left area of the panel
can
directly
access
the
common
function
operation menu.
2.
After
selecting
a
direct
button,
the
corresponding menu will appear at the bottom of
the screen. Press the corresponding button below
to operate the function.
3. After selecting a function, rotate the large knob to adjust the corresponding parameter values.
Adjustment parameters are displayed in the red character section in the function menu tag.
--------------------------------------------------------------------------------------------------------
KEY function settings and operation
Short press [KEY] to enter the menu of KEY items. The KEY menu will appear at the bottom of the screen:
Page1:
KEY TYPE
KEY SPEED
IAMBIC
TONE
TONE LEVEL
Page2:
QSK TIME
DI/DA RATIO
CW TRAINER
KEY TYPE: manual/automatic mode settings
KEY SPEED: automatic key bit rate settings
IAMBIC: Iambic A/B mode settings
TONE: sidetone frequency settings
TONE LEVEL: sidetone volume settings
QSK Time: QSK time setting
DI/DA RATIO: automatic key dot-and-dash interval proportion settings
CW TRAINER: CW learning mode switch
MSG function setting and operation
Short press [MSG] to enter the menu of MSG items. The KEY menu will appear at the bottom of the screen:
Page1:
MGS 1
MGS 2
MGS 3
MGS 4
MGS 5
This function aims to pre-store edited information and is used to automatic transmission function.
Directly
access
to
functional button area
Multifunctional
button area
