f)
When seeing this screen, release both of the VOL buttons and the update mode is ready.
g)
The X5105 will apply internal flash memory erasing process.
h)
Erasing finished
Note: Don’t unplug the power cable during the erasing process.
i)
If such a screen does not appear, try again from
Section 2 step a)
.
3.
Use the Hyper terminal software:
In order to transfer the firmware to the device, we use serial hyper terminal software which
is named TeraTerm4.96.
3.1.
Configuration of TeraTerm4.96:
a)
Select the serial port:
Double-click
this icon
