Operation
50
CW communication
Use manual keys or external keying unit for operations.
Operation methods:
1. Insert keys (three-wire) in KEY interface at right side of plug;
2. Press [MODE] key to switch to CW (or CWR) mode;
3. Press [MENU] key in a short time to switch to the menu in page 4, and then set parameters of relevant
telegram keys and QSK.
4. Press telegram key to enable CW communication.
Trainer mode
You can take X5105 as a CW code trainer in following methods:
Press [MENU] key in a short time to switch to menu in page 4 and select QSK function as 'OFF'.
There will be CW sidetone of transceiver after pressing telegram keys under such conditions, but signals will not be
transmitted externally.
Tips:
See the introduction to multi-function menu 4 for selection of telegram keys and
relevant settings of auto keys or other operations.
