XIEGU VG4, Руководство по установке

Страница: 6 / 7

Main support
Matching box
NO:1
NO:2
NO:3
NO:4
NO:5
NO:6
NO:8
NO:9
20m capacitor cap
40m capacitor cap
NO:10
NO:7
Main counterpoise
VISIT RADIODDITY.COM FOR DOWNLOADS AND HELP 05
3.3 Commissioning Step
①
Adjust main rod NO:1-NO:3, or may adjust the
center frequency point of 10m band.
②
Adjust main rod NO:5, or may adjust the center
frequency point of 15m.
③
Adjust main rod NO:7, or may adjust the center
frequency point of 20m.
④
Adjust main rod NO:8 - NO:9 length, or may
adjust the center frequency point of 40m.
⑤
The rough center frequency point of each band is
as follows:
40m
:
7.05MHZ
15m
:
21.3MHZ
20m
:
14.2MHZ
10m
:
28.5MHZ
⑥
Due to the influence of installa�on environment,
if there is any devia�on, please adjust it appropriately
according to above parameters.
VG4 antenna can be adjusted to frequency band center frequency point that we need. During
the adjustment, the adjustment of the high frequency band shall affect the low frequency
band, while the adjustment of the low frequency band shall not affect the high frequency band.
Therefore, the adjustment sequence is: to adjust from 10m of high frequency band to 40m of
low frequency band. Generally, only 40m frequency band needs appropriate adjustment.
⑧
Twist in the main counterpoises
.
*Please make sure that each main rod is connected and fastened well; otherwise the
overall strength of the antenna shall be affected.