Connection Guidance with G90
1.
Remove the original machine head of G90, connect the host to GSOC with an
extension cord.
2.
Connect the I/Q socket at the tail of the host to the I/Q socket at the back of GSOC
with the 3.5mm stereo cable provided.
3.
Plug the provided 5525 power cord into the external power port on the right side of
GSOC. Supply voltage range: 11~14V DC
*Note that due to the status of the prototype, the G90 host cannot be completely powered
off after shutting down the GSOC. At this point, you only need to unplug the power cord
of the G90 host. This is a bug of the prototype, which has been resolved for machines
under mass production.
Connection Guidance with X5105
1.
Insert the USB port of the X5105 data cable into the left USB port of GSOC;
insert the 3.5mm plug of the data cable into the CIV or COMM port on the right
side of X5105.
2.
Insert the MCX signal extension cord into the IF signal output port on the left side
of X5105 and the IF signal input port on the right side of GSOC.
3.
Plug the provided 5525 power cord into the external power port on the right side
of GSOC. Supply voltage range: 11~14V DC
