1
Read this manual carefully before use, and retain it for future reference.
Instructions for disassembling and assembling bezel
1. Press the edge of the bezel with your index finger and thumb, or press the bezel with your palm, and then turn it
counterclockwise (about 20 degrees) with a gentle force to loosen it.
2. Pinch up and remove the bezel.
3. Match the alignment point inside the replacement bezel with the alignment point of the watch (at 12 o'clock position).
Place the bezel horizontally and fasten it to the watch body.
4. To install the bezel, press the edge of the bezel with your index finger and thumb, or press the bezel with your palm and
turn it clockwise with a gentle force until a "click" is felt when it is installed in place.
Option 1
Option 2
Hollow
alignment
points
Solid
alignment
points
Care & Maintenance
1. When dismantling the bezel counterclockwise, excessive force can damage the internal structure.
2. When reassembling the bezel clockwise, make sure the bezel is horizontally engaged with the watch body before
turning it to avoid damaging the internal structure.
3. It is not recommended to wear a watch without the bezel installed to prevent skin scratches or wear on the internal
structure .
4. The bezel contains magnetic components and is recommended to avoid strong magnetic environments. When
charging, the watch face pop-up function triggered by installing the bezel will be invalid.
5. The alignment point on the back of the bezel must align with the alignment point at 12 o'clock position of the watch.
The corresponding watch face can only be activated after proper installation.
6. Regular disassembly and assembly of the bezel may lead to the internal structure wearing out and becoming unable
