03
• Automatic connection
While the earphones are in the charging case, opening the case will cause the earphones to
automatically connect to the most recently used Bluetooth device. If no connection history
is detected, or if the earphones cannot successfully connect to any Bluetooth device, the
earphones will automatically enter the awaiting connection mode.
Note:
If the earphones cannot automatically connect to a device, you will need to manually
connect the earphones to the desired device via the device’s Bluetooth settings.
Due to the connection characteristics of the Bluetooth signal, in dense environments with 2.4
GHz electromagnetic signal interferences, there may be occasional disconnects or no sound.
Clearing Connection History
1. Place the earphones into the charging case.
2. Press and hold the charging case’s function button for at least 10 seconds. When the indicator
light stays lit, release the button.
3. The earphones will restart and enter into pairing mode. Previous connection history has been
cleared.
Function Overview
Incoming calls
Gently tap either one of the earphones twice, to answer/end calls.
Music and voice assistant
While wearing both earphones:
Gently tap the right (R) earphone twice, to play/pause music.
Gently tap the left (L) earphone twice, to access the voice assistant.
Taking out an earphone will automatically pause music.
While wearing one earphone:
Gently tap the earphone twice, to play/pause music.
Note:
The voice assistant function requires device support, and voice assistant needs to be
authorized on the device.
Noise Cancelling Mode
Wear both earphones, press and hold either one of the earphones for 3 seconds. You will hear a
beeping sound to indicate the earphones have entered noise cancelling mode.
Note:
1. Noise cancelling mode cannot be enabled during a call or when receiving a call.
2. Find the eartip that fits the best to achieve better listening experience.
3. Illustrations of product, accessories, and user interface in the user manual are for reference
purposes only. Actual product and functions may vary due to product enhancements.
This version is for private use only and should not be distributed.
