This version is for private use only and should not be distributed.
6
After replacing the filter turn on the purifier, and press and
hold the filter reset button for 6 seconds. A beeping sound
indicates that the filter has been successfully replaced, and
the filter service time has been reset.
Note: Purifier with RFID label at the bottom do not require
reset.
Note: When the filter is saturated by harmful gases, it may give off odors. Please place
the filter in a sunny and ventilated place to eliminate odors.
Maintenance
Please make sure to turn off the air purifier and disconnect power before performing the
following operations.
Clean the filter cabinet
For best performance, use a vacuum cleaner or soft cloth to remove dust clinging to air
inlets or cabinet walls.
Clean laser particle sensor
Use a non-sharp tool to open the laser particle sensor cover, and use an air blow gun or
hair dryer to clean the laser particle sensor and its back cover.
