Xiaomi mi 2 MJDSH04YM, Руководство пользователя

Страница: 6 / 9

Troubleshooting
Issues Possible Causes Solutions
The heating
indicator does not
light up.
Boiled water overflows.
The color changes
or the limescale
builds up inside the
kettle.
Kettle does not heat.
Power plug is not properly plugged in.
Power plug is deformed.
The maximum water level mark is exceeded.
The hardness of local water is higher.
The on/off button is not pressed or gets stuck.
The thermostat is malfunctioning.
The thermostat is malfunctioning.
The kettle's lid is not properly closed.
There is too little water with water level
below the minimum mark.
Cables of internal terminal blocks
are loosened or damaged.
Replace power outlet.
Clean in time.
Properly plug in the power plug.
Contact the after-sales service.
Water does not boil
or not stop boiling.
Press the on/off button again.
Contact the after-sales service.
Contact the after-sales service.
Contact the after-sales service.
Close the lid securely.
Keep water amount within
the required range.
Power outlet is damaged or doesn't make
proper contact.
The base is not genuine or is not for this kettle.
Keep water within the required range.
Use the base that came with the kettle.
Circuit Diagram
5
220–240 V~
50/60 Hz
Heating Indicator
Thermostat
Connector
Boil-dry
Switch
Steam
Switch
Boil-dry
Switch
Thermostat
Heating
Element
Resistor
L
K
Q
2
Q
Q
1
K
N
E
L
N
E