This version is for private use only and should not be distributed.
04
• Installing a MicroSD Card
Make sure that the power to the security camera is already disconnected. Adjust the camera
lens upward until the MicroSD slot is revealed, then insert the MicroSD card into the card slot
with its contact points facing downward.
Note: Please unplug the security camera before inserting or removing the MicroSD card. Please
use a genuine MicroSD card manufactured by a qualified supplier, with a reading/writing
speed of no less than U1/Class 10. (Maximum support capacity is 64 GB)
MicroSD
• Restore Factory Settings
Press and hold the Reset button to restore your device to factory settings. Data stored on the
MicroSD card is not deleted.
Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/
Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection setup
page if the app is installed already. Or search
"Mi Home/Xiaomi Home" in the app store to download and install it. Open Mi Home/Xiaomi
Home app, tap "+" on the upper right, and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app
displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on
the current app version.
