8
.
Reset Filter's lifetime.
The filter lifetime should be reset if lights up, after
replacing the new filter, you need to reset filter lifetime.
1). Plug in the air purifier and turn it on.
2). Press and hold for 3 seconds.
3). Release and the light will turn off, indicating
that the reset is complete.
Filter replacement force mode
When using the air purifier in an environment of heavy pollution, the
lifespan of the air filter may be significantly reduced. You can change the
filters even if does not light up. Follow the steps below to perform a
hard reset.
1). Replace the air filters as mentioned in the Filter Replacement section.
2). Plug in the air purifier and keep in standby mode.
3). Press and hold for 3 seconds, and it will light up.
4). Press and hold again for 3 seconds, and it will turn off. The reset
is now complete.
13
3
seconds
（
h
）
6.
Clean
air
purifier
In order to keep your purifier working with more efficiency and life-time,
clean the filter (pre-filter side only) every 2 weeks with the Instruction
Below:
1). Clean out any dust, hair, or furs remain on the pre-filter by using the
vacuum hose.
2). Clean out any dust, hair, or furs remain on the bottom cover by using
the vacuum hose.
3). DO NOT wash the filter with any water or liquid.
7. Storage
Unplug the power cord, then wipe the machine clean, put the appliance
in
the packing bag
,
then
put
it
in a dry place away.
8. Environment
Do not throw away the appliance with the normal household waste at the
end of its life, but hand it in at an official collection point for recycling. By
doing this, you help to preserve the environment.
