Xiamen Rongta Technology Co., Ltd.
www.rongtatech.com
3
1. Instructions
RP80VI series is thermal barcode printer with high performance and reliability. It
is with high quality and competitive price and easy to use, so it is widely used in the
factory, logistics, restaurant, tea shop, etc.
Safety Notices
Please read the below warnings carefully and observe it strictly before operating
the printer.
1.1safety warnings
Warning:
Do not touch the printer cutter or paper tearing cutter.
Warning:
The print head is the head and the peripheral comp finishing the printing.
1.2 Notices
(1) The printer should be put on solid place. Don’t put printer on vibration and
shocking place.
(2) Don’t print or save printer in high-temperature, high-humidity and heavily polluted
place.
(3) Printer adapter should be connected to a properly grounded socket. Don’t use the
same socket together with large motors or other equipment that may cause voltage
fluctuations.
(4) Avoid water or conductive material (such metal) going into the inside of
the printer, once happen, should turn off the power immediately.
(5) If long time not uses printers, should disconnect the adapter power.
(6) Don't disassemble the printer for overhaul or transformation.
(7) Please only use the adapter, which is together with printer
(8) To ensure the quality and lifetime of printer, we recommend to use high-quality
thermal paper and ribbon.
(9) Make sure the printer power is turned off when Pull or plug connection lines.
(10) When Pull or plug power cord, please hold at the cord end, which is marked
with arrow (do not pull the soft part of the cord) .
