Pixie-32 User Manual
Version 0.2
LongPulseDuration:
Length of the long pulse detection period.
Note the constraint:
1 <= LongPulseDuration <= 63
LongPulseThreshold:
Threshold of the long pulse detection.
Note the constraint:
1 <= LongPulseThreshold <= 255
CooloffPeriod:
The length of the adaptive cooloff period
Note the constraint:
1 <= CooloffPeriod <= 4095
CooloffTau1:
Exponential decaying constant 1
Valid range > 0 (unit in s, floating point)
CooloffTau2:
Exponential decaying constant 2
Valid range > 0 (unit in s, floating point)
ScalingFactor1:
Scaling factor for AF
Valid range > 0 (floating point)
ScalingFactor2:
Scaling factor for AS
Valid range > 0 (floating point)
Filter_BW:
Setting per ADC channel (i.e. only 4 entries). Sets the 3 dB attenuation frequency
for the antialiasing filter:
= 0, 14 MHz
= 1, 10 MHz
= 2, 7.5 MHz
Coarse_Gain:
Setting per ADC channel (i.e. only 4 entries). Specifies coarse gain from -5 to 31
dB in 1 dB steps, values from 0 to 36 inclusive.
Total gain = Coars Fine_Gain
Fine_Gain::
Setting per ADC channel (i.e. only 4 entries). Specifies fine gain from 0 dB to
0.875 dB in steps of 0.125 dB, values from 0 to 7 inclusive.
Total gain = Coars Fine_Gain
List-mode data format
Description of header words.
Output data for each recorded event consists of an event header plus trace if the recording of trace is
enabled by the user. There are different types of output data options after enabling certain DAQ
© 2017 XIA LLC
20
