Xhorse VVDI, Руководство пользователя

Страница: 19 / 48

BMW TOOL User Manual
19
Ver: 1.1
Attention: when you get this window, you’d better try with this method: insert
temp key to ignition switch, try start, if not start, take key off, then insert to
ignition again, try start again, if still not start, take key off ignition and press
“No” (In File Make Key you need place temp key in programmer)
(PICTURE 5.16)
5.3. CAS3+ encrypt version (include ISTAP)
make dealer key by OBDII
5.3.1.
Add new key with working key

Attention: Under these steps, there will come some ASK or NOTE message,

Method 1, operation : This method support CAS3+ encrypt version (ISTAP not
support). you can follow:
1) Read EEPROM with Read EEPROM in (PICTURE 4.1) by OBDII
2) Make dealer key with File Make Key function

Method 2, operation :
1)
Insert a working key to car ignition and switch ON
2) (PICTURE 5.1), use Get Key Info read CAS immo data, cutting code, remote
frequency and etc. (Remember: when you get window (PICTURE 5.5), you need
choose Add Key ) Attention: The key info can read directly if CAS isn
’t ISTAP version.
If CAS belongs to ISTAP version, there will be update CAS flash window (PICTURE
5.17) for the first time read key info. Upgrade CAS flash only need 10 minutes, after
update flash turn to step 5). If the upgrade progress failed by some reason, you can
fix it with Menu->CAS Repair->ISTAP4* version OBDII Repair. Repair with CAS ID
(write in step2)). Detail can be found in chapter 9 CAS Repair
www.xhorseshop.us