
VVDI – MB TOOL User Manual
22
2021-06-01
Ver: 2.1
5.4.
EIS Key Information
Key Password
: Key password is used for EIS to authenticate the working key. It is also
the password you need when you want to generate a new key
(IMPORTANT).
Paste key password
: You can paste your password to here directly.
Erase Password
: Renew activated EIS to un-activated status, make EIS allow write new
data. Attention: Renew EIS not only need erase password but also
the
1
key password.
Get erase password:
First, you need to read the EIS data, then press button
“Get” and
then you can get erase password online
Special Key
:
A special key stored in EIS.
Previous used key
: The previous used key in EIS, which had been used and is always
different form the last key position.
Last used key
: The last used key in EIS. Example: insert working key with in follow
order: 3, 3, 1 and 1, then the lasted used key is 1, the previous used
key is 3.
Key 1
– Key 8
: Key track (hash) for every key. Attention: key track is not a fixed value.
When you insert a working key to EIS, its key track will changed. You
can verify working key status though this method.
Key used
:
Selected means this position have a working key.
Key Disabled
: Selected means this position was disabled, not accept any key. Now we
don‟t support enable key
Содержание SK185
