XHDATA D-808, Руководство пользователя, Страница: 9 / 18

9
Charging the radio
To charge the radio, plug a USB - C cable (included) into the USB jack on the right
side of the radio. (Some early versions of the radio use a USB Micro connector.) The
battery icon will cycle while the radio is charging. Charging will stop when the
battery is fully charged or after 10 hours, whichever is first. Note: some early ver-
sions of the radio may require long pressing the SSB button to begin charging.
Options and setup
FM Tuning range
The radio can be set for different tuning ranges that are convenient for FM broad-
casting in different regions of the world. With the radio off, long
- press the FM
button. The current setting, showing the lowest frequency of the band, is displayed.
To change the setting, press the FM button again to cycle through the three op-
tions:
•
64.0 MHz
•
76.0 MHz
•
87.5 MHz
Longwave
The LW band is not enabled by default. To enable it, turn the radio off and long -
press the LW/MW button. The radio will display the current status of the setting,
“ LW ON ” or “ LW OFF. ” To change the setting, press the LW /MW button. When LW
is on, pressing the LW/MW selects either LW or MW. When it is off, the LW option
is not available.
Medium Wave Step
The tuning step for medium wave (MW) can be set for 9 kHz or 10 kHz. To change
the setting, turn the radio off and long
- press the 9/10 kHz button (0). The current
setting is displayed. Press the button again to cycle through the two options. 10 kHz
us used in the Americas and 9 kHz in the rest of the world.
Beep
The radio as it comes from the factory beeps after each key press. To disable this,
turn the radio off and long
- press the BEEP button (5). Unlike other options, multiple