The 845PE-ANT MAINBOARD
Page 36
Managing The PC BIOS
A6 I5&N80
,,( ! (%% ,4
C!,C- 0 (%%
80 ,
-! 0 (%%
' (--
,-%!((-- -!' 4
+' . % A ,, 4
, - (
Video Off In Suspend
This field has two options: Yes or No. These options allows you to determine
the way in which the monitor is switched off.
Suspend Type
This field allows you to select the status of the CPU when the system goes into
the suspend mode. If you select by Stop Grant the CPU stops running com-
pletely, by "PWRON Suspend" keeps the CPU.
Suspend Mode
When enabled, after the set time of system inactivity, all devices except the
CPU will be shut off.
HDD Power Down
If this field is enabled, after a set time of system inactivity, the hard disk will
be powered down while all the other devices remain active.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter
the Soft-Off state when the system has “hung”.
CPU THRM-Throttling
This field allows you to select the CPU Throttle rate. When the CPU tempera-
ture is too high, the onboard hardware monitoring will tell the CPU to reduce
it’s processing speed to the throttling speed to protect the CPU . This function
will not work when the CPU Warning Temperature is Disabled.
Wake On LAN
An input signal from the LAN will wake up the system from a soft off state.
Resume By Alarm
This field allows you to wake up the system at a predetermined date in the
future. If you select Enabled then you need to enter the date and the time at
which you want the system to “wake up.”
**Reload Global Timer Events**
When Enabled, an event occurring on each device listed below will restart the
global time for the standby mode.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D]
