5.5.1.2 20 x 2.5" Drive Configuration
Drive Configuration
Table 5-10
Drive configuration
Configuration
Front Drive
Drive Management Mode
20 x 2.5" drive switch model
configuration
● Front drives: 20 x 2.5"
– Slots 0 to 3 and 12 to 15
support only SAS/SATA
drives.
– Slots 4 to 11 and slots 16
to 19 support only NVMe
drives.
● SAS/SATA drive: 1 x RAID
controller card
a
● NVMe drive:
– CPU pass-through
– PCIe switch
● a: The PCIe plug-in RAID controller card is installed in slot 26 by default.
● Consult your local sales representative or see "Search Parts" in the
.
Drive Numbering
NO TICE
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the
FusionServer G5500 V7 Server Maintenance and Service Guide
.
Drive numbering of the 20 x 2.5" drive (8 x SAS/SATA + 12 X NVMe) configuration in
Figure 5-16
Drive numbering
FusionServer G5500 V7 Server
Technical White Paper
5 Hardware Description
Issue 02 (2023-12-13)
Copyright © xFusion Digital Technologies Co., Ltd.
35