XFtp TR-3, Руководство по эксплуатации

Страница: 24 / 33

TR-3 Signal Level Meter - Operation Manual
23
Frequency Mode
Use the
CH/F
key to select the
Frequency mode.
The Frequency screen shown
above displays the Audio
frequency of the analog channel
that was selected in the Single
Channel mode. The level of the
Audio carrier is also shown.
For a digital channel, the Frequency screen will display the center
frequency of the channel and the level for the center frequency will be
shown (not power level for the full channel bandwidth seen in the Single
Channel measurement mode).
In the frequency mode, the TR-3 can be tuned to any frequency from
46 MHz to 1002 MHz. To change the frequency, press the
key
until the desired digit in the frequency is blinking and then press the
and keys to select the desired value.
If the tuned frequency is 1000.00 MHz or higher, the leading “1” is not
shown.
Example: 1,001.75 MHz is displayed as 001.75 MHz.