Operation
Loading a Satellite Configuration
To use the last satellite configuration loaded (even prior to
power off), press the
F4
Button to go directly to the Signal
Display Mode.
To load a new satellite configuration, press the
FIND
Button
to display the satellite configuration list.
Note:
The XFTP SAT LITE will always power up
in this mode.
• Use the or Direction Button(s) to highlight the
desired configuration, or use the or Direction
Button(s) to move through the list 4 configurations at a
time.
• With the desired satellite configuration highlighted, press
the
ENTER
Button to load the satellite configuration
parameters. The display will momentarily indicate
Loading...
while the instrument is loading the satellite
configuration.
99 Washington Street
Melrose, MA 02176
Fax 781-665-0780
TestEquipmentDepot.com
