XFtp Cable Tester, Руководство по эксплуатации

Страница: 10 / 20

XProTec Cable Tester with Universal Connector Kit - Operation Manual
8
Battery Installation
The XProTec Cable Tester includes one (1) 1.5 V AAA sized
battery. To install the battery, perform the following steps:
1. Remove the battery access cap at the bottom of the
Cable Tester by turning it counter-clockwise.
2. Insert the included battery positive (+) side first into the
body of the Cable Tester.
3. Replace the battery access cap.
Operation
To test a cable run, perform the following steps:
1. Remove the Detachable Tone Detector
from the bottom of the Cable Tester by
turning it counter-clockwise.
2. Attach the Cable Tester to the destination
end of the cable run.
3. Attach the Detachable Tone Detector to
each one of the cables at the home run
cable location. Once the proper cable is
found, a tone will sound.