XFit ATLAS, Руководство пользователя, Страница: 10 / 28

9
ASSEMBLY INSTRUCTIONS
Note : Assembly requires 2 people.
Step 1
Place the treadmill in the upright position on a level surface. Place one hand on the rear
end of Main Frame (1) and use your other hand to pull out the Spring Knob (77). Lower
the Main Frame (1) down from the rear of treadmill until the Spring Knob (77) "pops" into
the locked position and the Main Frame (1) is flat with the ground.
TO PREVENT INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN
SETTING DOWN THE DECK.
Step 2
Using two Stabilizer Knobs (8) to install the Right Stabilizer Tube (82) into the Stabilizer
(80), and thoroughly tighten the Stabilizer Knobs (8). Repeat the step above on the LEFT
side to install the Left Stabilizer Tube (81).
(8) Stabilizer Knob
4 PCS