10
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
POWER ON :
POWER OFF :
Seat movement or press the button.
Automatically shuts off after four
minutes of inactivity.
MODE/RESET BUTTON:
Press to select display functions, including
SCAN, TIME,
TOTAL COUNT, COUNT,
and
CALORIES.
Press and hold for two seconds to reset all functions to
zero, except
TOTAL COUNT.
FUNCTIONS:
SCAN:
TIME:
TOTAL COUNT:
COUNT:
CALORIES:
Automatically scans each function of
TIME, TOTAL COUNT, COUNT,
and
CALORIES
in sequence with change every six seconds.
Displays the elapsed time from one second up to 99:59 minutes.
Displays the total accumulated number of rows you have taken, from zero to 9999
rows. The total accumulated rows is retained when the meter is turned off.
Displays the total number of rows you have taken from zero to 9999 rows.
Displays the calorie burned from zero to 9999 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE:
The
TOTAL COUNT
will be reset to zero after batteries are removed for battery
replacement or storage of the unit.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with two AA batteries, the batteries are not
included. Refer to the illustration to install or replace the batteries.
AA Batteries
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline
battery with another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
5. Do not dispose of batteries in fire.
