XFIREAUDIO.COM
XFR series
LIFE AMPLIFIED
File menu
In the file menu you can select to store all the settings you made in your iPad or PC. Simply select Store All Setup and
the program will store all programmed settings in a file on your device.
With Load All Setup you can retrieve a stored settings file to load it into a DSP PRO.
Config menu
When connection with the DSP PRO is lost Engage in the Config menu will reconnect the iPad or PC with the DSP PRO.
Run Configuration Wizard starts up the Wizard and resets the DSP PRO to default settings at the same time.
Store DSP this is an important selection to remember, Store DSP saves all settings to the DSP PRO so your programmed
settings will not be lost after switching off the system.
REM Output Delay here you can set a delay for the remote out of the DSP PRO in case you experience noises when the
system is switched on or off.
Working Mode gives you the option to switch the DSP PRO from Standard mode in to Expert mode. From default the
DSP PRO is set to Standard, setting it to Expert mode will unlock restrictions set to the x-over section.
With Password Protection you can lock your DSP settings with a password so other persons cannot change any your DSP
settings.
Input selection
Directly select one of the inputs used with the DSP PRO. Each input needs to be programmed separately.
Preset Selection
Directly select and program each preset of the DSP PRO. Each preset has to be programmed separately.
To make programming of presets easier select Preset, a drop down menu will show where you can select to copy from
one of the other already programmed presets or to copy from an already programmed input of the DSP PRO.
