5
EN
Assembly and installation guide:
assembly steps
1
2
2
3
Place all components of xSense Pro on a flat
surface and start assembling.
The first thing to do is to insert the rod into
the bracket as shown.
Lean the anemometer blades against
their seat and, using the supplied
Allen screw I), fasten it to the axle,
ensuring that it turns freely without
friction.
Insert the bird deterrent needles into
the respective holes on the
circumference of the cone, if
necessary use a small hammer
Fasten the rod to the bracket using
fastening kit C) and a screwdriver
C)
Thread the cable
Secure the cable to the bracket as shown.
