Setting the Time and Date (movement calibers 2893-2, 2892A2, 2824-2)
Important note:
Do not change the date between 8 p.m. and 2 a.m.
as this may damage the
movement. This is when the pinions are being repositioned to carry out the automatic date change.
1.
Unlock the screw-down crown (A) by turning it 10-12 times counter-clockwise.
Pull out the crown (A) to Position “2” (one “click” out). Rotate the crown (A)
counter-clockwise until the date shows one day earlier than the date you want to set.
Pull out the crown (A) to Position “3” (two “clicks” out). The seconds hand is stopped.
Set the local time by turning the crown (A) counter-clockwise to move the hour and
minute hands forward
.
Turn the watch hands past 12 once if you’re setting the watch for a
P.M. time.
Setting the Time, Day and Date (movement caliber 2836-2)
Important note:
Do not change the date between 8 p.m. and 2 a.m.
as this may damage the
movement.
1.
Unlock the screw-down crown (A) by turning it 10-12 times counter-clockwise.
Pull out the crown (A) to Position “2” (one “click” out). Rotate the crown (A)
clockwise until the date shows one day earlier than the date you want to set.
Rotate the crown (A) counter-clockwise until the day shows one day earlier than the day
you want to set.
Pull out the crown (A) to Position “3” (two “clicks” out). The seconds hand is stopped.
Set the local time by turning the crown (A) counter-clockwise to move the hour and
minute hands forward
.
Turn the watch hands past 12 once if you’re setting the watch for a
P.M. time.
2.
Once you have set the time or date
,
return the screw-down crown (A) to the locked
position by pressing it against the case and turning it clockwise. Screw-down crown (A)
now should be screwed down tightly to Position “1”.
Remark:
You can synchronize the seconds hand with an official time signal (radio/ TV/Internet).
When the crown (A) is pulled out in Position “3” (two “clicks” out)
,
the seconds hand is
stopped. As soon as the time setting has been synchronized, return the screw-down
crown (A) to the locked position by pressing it against the case and turning it clockwise.
Screw-down crown (A) now should be screwed down tightly to Position “1”.
