FUZHOU CANWELL IMPORT & EXPORT CO., LTD.
10
Tel:0086-591-87610093, 87614264 Fax:0086-591-83640189,87279269 E-mail:[email protected]
5.20 Count mileage
5.20.1 Dials up the unit, it will report a Geo-info,the Geo-info include mileage.
5.20.2 you can sent
"clearmile123456
", if set successfully, it will reply SMS "clearmile ok",the
mileage change zero.
5.21 Remote control oil and circuit
5.21.1
Control oil
Send SMS
"stopoil123456 "
to control oil. For example send SMS:stopoil123456
To supply the oil again, send SMS
"supplyoil123456"
to the unit.
5.21.2
Control circuit
Send SMS
"stopelec123456"
to control circuit. For example send SMS:
stopelec123456
To supply the circuit again, send SMS
"supplyelec123456"
to the unit.
If there is no authorized number, all number can control. If there is already an authorized number,
only the authorized number can control.
5.22 Alarm time
The sms command is for controlling alarm time.
Example,send SMS
"alarm3"
to tht unit, if success,the unit will return “Alarm time ok”. The
unit will alarm 3 time to handset(by SMS) or platform (by GPRS),then to stop when occur alarm .
The value domain is 1-999,that is, “alarm1”~~”alarm999” are all effective . Notice ,the interval
of alarm is 3 minutes .
5.23 Read password
The sms command is reading the password from unit when user forget the password in
unit .
Example,send SMS
"readpaw"
to tht unit, if success,the unit will return “Password is ******.”.
5.24 Get position message by SMS
The sms command is getting position message by SMS..
Example,send SMS
"fix123456"
to tht unit, if successing , the unit will position message .
6 Cautions
Please comply with the instructions to extend the unit life:
1. Don’t dismount the antenna randomly, or use other antennas. This may interfere the transmission,
and increase the radiation as well.
2. Don’t disassemble or refit the unit.
3. Handle carefully. Don’t vibrate or shake it violently.
4. Don’t use & store the unit in dusty places.
5. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent.
6.Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
7. Don’t put the unit in over heated or over cooled places.
7 Faults & The solutions