5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district.
The unit will send the message to the authorized numbers when it breaches the district.
5.11.1
Set up:
When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS
spspace+latitude,longitude; latitude,longitude to unit to set
the restricted district.
In case of breach, it will send SMS “stgeo-info” to the authorized numbers.
Remark:
The first latitude & longitude is coordinate of the top left corner of the Geo-fence, while
the second latitude&longitude is the coordinate of the bottom right corner.
It will alarm one time in each setting.
5.11.2
Cancel:
Send SMS nospassword to deactivate this function.
This function will be out of effect after the unit moves outside the district.
5.12 Movement alert
5.12.1
Set up:
When the unit stays immobile in a place for 3-10 minutes, the user can send
SMS move+password to the unit, then the unit will reply “move ok!”.
In case of such a movement
（
the unit default distance is 200M, it will send
SMS “Move” along with a Geo-info to the authorized numbers.
It will alarm one time in each setting.
5.12.2
Cancel: Send SMS password to deactivate the movement alert.
Remark:
This function will be out of effect after the unit moves outside the district.
5.13 Over-speed alert
5.13.1
Set up:
Send SMS speed+pspace+080 to the unit (suppose the speed is 80km/h), and
it will reply “speed ok!”. When the target moves exceeding 80 km/h, the unit will send SMS
speed+080!+Geo-info to the authorized numbers. It will alarm one time in each setting.
5.13.2
Cancel:
Send SMS password to deactivate the overspeed alert
Remark:
It is recommended that the speed alarm is set at not less than 50km/h.
For below that rate, it may cause the excursion of the GPS signal influenced by clouds etc.
5.14 IMEI checking
Send SMS command "imei+password" to the unit.eg.: Send SMS command "imei123456" to
unit, a imei number in 15 digits will be returned to your cell phone.
Phone: +316-5326-7060
