11
lat: 22.566923 long: 114.051331 speed: 0.00 28/10/09 03:33 F:4.32V,0, Signal:F
move imei:359587011016261 05 41.9
5.10.2
Cancel: Send SMS password to deactivate the movement alert. It will
reply “nomove ok!”.
5.11 Overspeed Alert
This function is using for the owner to control the target’s speed.
5.11.1
Setup: Send SMS speed+pspace+080 to the unit (suppose the speed
is 80km/h), and it will reply “speed ok!”. When the target moves exceeding 80 km/h, the
unit will send a SMS speed+080!+Geo-info to the authorized numbers. It will send such
a SMS again when the speed is low 80 km/h then exceed it within 3 minutes.The alert
format as below:
lat: 22.566923 long: 114.051331 speed:85.60 28/10/09 03:33 F:4.32V,0, Signal:F
speed imei:359587011016261 05 41.9
5.11.2
Cancel: Send SMS password to deactivate the overspeed alert.It will
reply “nospeed ok!”.
Remark:
It is recommended that the speed alarm is set at not less than 80km/h. For
below that rate, it may cause the excursion of the GPS signal influenced by clounds etc.
5.12 SOS Button
Press the SOS for 3 second, it will send “ help me !+ Geo-info” to all the authorized
numbers every 3 minutes. The alert format as below:
lat: 22.566923 long: 114.051331 speed:85.60 28/10/09 03:33 F:4.32V,0, Signal:F
heip me imei:359587011016261 05 41.9
The unit stop sending such a SMS and it will reply the user SMS ”help me ok!” after any
authorized number reply SMS ”help me!+password” to it.
