Xerox XC353, Руководство пользователя

Страница: 20 / 39

17
Setting Copy Exposure Range
The exposure settings, Light, Auto and Dark can be adjusted. This can be
useful when copies are consistently too dark or too light. These new
settings will remain until they are manually changed again.
Note: In the following procedure, it is important to complete step 2
immediately after step 1, as the copier will return to the ready mode in
approximately 10 seconds.
1. Press and hold the Exposure button
until the indicator for the current
exposure setting starts to flash
(approximately 10 seconds).
2. Press and release the Exposure button
until the flashing light is under the
indicator for the appropriate exposure
range.
Approximately 5 seconds after selecting the appropriate indicator the
exposure indicator will go out, the auto and ready indicators will light, and
the new copy exposure range will be set.
XC353, XC355 and XC356 Copiers only
Note: Pressing the Stop/Clear button will have no effect during this
procedure.