![background image](http://html1.mh-extra.com/html/xerox/workcentre-m940/workcentre-m940_getting-started-manual_4286976015.webp)
G e t t i n g S t a r t e d
11
M A K I N G C O N N E C T I O N S
Note: Use only a USB cable or a parallel cable when
connecting the WorkCentre and your PC. You must be
running Windows 98 or Windows 2000 to use a USB
cable. Otherwise use a parallel cable that is IEEE
1284-1994 compliant (Sold Separately).
Note: When power is connected, the
WorkCentre will automatically go
through an audible priming cycle
which lasts for approximately 2
minutes. For optimum performance
do NOT unplug the copier.
AC power cord
Connect to the
WorkCentre and a
power outlet.
USB cable (shown)
Connect cable.
Connections
Note: Make sure that all shipping tape is removed
before connecting the cables.
Note: Your WorkCentre can be used as a stand alone
machine for copying. It is not necessary to connect
your PC when using your WorkCentre as a stand
alone machine.
2
1
C1/C2 .qxd 8/1/00 6:21 PM Page 11
Содержание WorkCentre m940
Страница 4: ...G e t t i n g S t a r t e d...