![background image](http://html.mh-extra.com/html/xerox/workcentre-6605/workcentre-6605_service-manual_884418347.webp)
Image Quality
Xerox Internal Use Only
Phaser 6600 and WorkCentre 6605
Service Manual
3-21
3
Load the envelopes in the Bypass Tray properly.
Does this solve your problem?
The task is
complete.
Go to action 4.
4
Check the paper loaded in the paper cassette.
Remove the paper cassette, adjust the paper guides, and reload the
paper correctly.
Reinstall the paper cassette correctly, and perform a test print. Is
the image printed correctly?
The task is
complete.
Go to action 5.
5
Check the paper humidity conditioning effect.
Load the unopened (or sealed and stored under humidity control)
and recommended paper, and then perform a test print.
Is the image printed correctly?
The task is
complete.
Go to action 6.
6
Check the paper type setting.
Is the paper type setting corresponding with the paper printed?
Go to action 7.
Set the correct
paper type.
7
Check the paper transfer path.
Are there any smears or foreign substances on the path between
the paper entrance and the paper exit?
Remove the
foreign
substance.
Go to action 8.
8
Check the paper feed path roller.
Is the roller on the paper feed path not dirty, damaged, or worn,
and does it work correctly?
Also, is the roller installed correctly?
Go to action 9.
Clean or
replace the
corresponding
roller, and
reinstall it.
9
Check the installation status of the Transfer Roller.
Is Transfer Roller installed correctly?
Go to action 10.
Reinstall
Transfer Roller.
10
Check the Fuser Assembly.
Is the Fuser Assembly installed correctly?
Go to action 11.
Reinstall the
Fuser
Assembly.
11
Check the Fuser Assembly.
WARNING:
Start the operation after the Fuser has cooled
down.
Remove the Fuser Assembly. Turn the gear by hand, and examine
the Heat Roll section.
Is the Heat Roll section not dirty or damaged, and does it work
correctly?
Contact Xerox
Technical
Support.
Replace the
Fuser
Assembly.
Action
Yes
No
Содержание WorkCentre 6605
