![background image](http://html.mh-extra.com/html/xerox/workcentre-6027/workcentre-6027_user-manual_884372077.webp)
Installation and Setup
Xerox
®
WorkCentre
®
6027 Multifunction Printer
77
User Guide
Setting Up Scanning
This section includes:
•
Scanning Setup Overview ................................................................................................................................................. 77
•
Setting Up Scanning to a Shared Folder on Your Computer ............................................................................. 78
•
Setting Up Scanning to an FTP Server ........................................................................................................................ 80
•
Setting Up Scanning to an Email Address ................................................................................................................. 80
•
Setting Up Scanning With USB ...................................................................................................................................... 81
See also:
Scanning
on page 93
Scanning Setup Overview
If the printer is connected to a network, it is enabled for scanning. Before you can scan, you must do the
following:
•
If you are scanning to a shared folder on your computer, share the folder, set the correct
permissions, and add the folder as an Address Book entry in CentreWare Internet Services.
•
If you are scanning to an FTP server, add the FTP server and set the correct folder permissions as an
Address Book entry in CentreWare Internet Services.
•
If you are scanning to an email address, configure the email server in CentreWare Internet Services.
If the printer is connected using a USB cable, you cannot scan to an email address or a network location.
You can scan to a folder on your computer, or scan into an application after installing the scan drivers
and the Express Scan Manager utility.
For details, see
Installing the Software
on page 41.