![background image](http://html.mh-extra.com/html/xerox/workcentre-6027/workcentre-6027_user-manual_884372146.webp)
Copying
146
Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
Changing the Default Copy Settings
This section includes:
•
Changing Collation ............................................................................................................................................................ 146
•
Changing Reduce/Enlarge .............................................................................................................................................. 146
•
Changing the Original Size............................................................................................................................................. 147
•
Changing the Original Document Type ................................................................................................................... 147
•
Changing Lighten/Darken .............................................................................................................................................. 147
•
Changing the Default for Sharpness ......................................................................................................................... 147
•
Changing the Default for Color Saturation ............................................................................................................ 147
•
Changing the Auto Exposure ........................................................................................................................................ 147
•
Changing Auto Background Suppression Level ..................................................................................................... 147
•
Changing the Default Color Balance ......................................................................................................................... 148
•
Changing the Default for 2-Up .................................................................................................................................... 148
•
Changing Edge Erase ....................................................................................................................................................... 148
The printer uses the default copy settings on all copy jobs unless you change them for an individual job.
You can modify the default copy settings.
To change the default copy settings:
1.
At the printer control panel, press the
Machine Status
button.
2.
Touch the
Tools
tab.
3.
Touch
Default Settings
.
4.
Touch
Copy Defaults
, then touch the option that you want to change.
Changing Collation
1.
Touch
Collation
.
2.
Touch one of the following:
−
Collated
: Turns on collation for originals placed on the document glass only.
−
Uncollated
: Turns off collation.
3.
Touch
OK
.
Changing Reduce/Enlarge
1.
Touch
Reduce/Enlarge
.
2.
Touch one of the following:
−
To select a default preset image size, touch a button.
−
To set the default copy size in increments of 1%, touch the
+
or
-
buttons or use the keypad to
set the percentage.
3.
Touch
OK
.