May 2013
5-63
Xerox® WorkCentre® 5790 Family
PL 10.12
Parts Lists
PL 10.12 Inverter Assembly (2 of 4)
Item
Part
Description
1
–
Inverter output assembly (P/O PL
10.11 Item 23)
2
–
Post fuser gear (20T) (REF: PL
10.15 Item 7)
3
Bearing
4
Dog drive assembly (REF: PL
10.15 Item 6)
5
–
Idler gear (20T) (REF: PL 10.15
Item 4)
6
–
Tri-roll knob (REF: PL 10.15 Item
12)
7
–
Inverter gate (Not Spared) (REP
10.11)
8
–
Tri-roll shaft assembly (Not Spared)
(REP 10.12)
9
Post fuser exit roller (See NOTE 2)
(W/O TAG 004)
–
–
Post fuser exit roller (P/O PL 10.12
Item 24) (W/TAG 004)
10
–
Tri-roll guide (P/O PL 10.11 Item
23)
11
–
Front gravity finger (P/O PL 10.11
Item 23)
12
–
Gravity gate finger (P/O PL 10.11
Item 23)
13
–
Rear gravity gate finger (P/O PL
10.11 Item 23) (W/O TAG 005)
–
–
Rear gravity gate finger (P/O PL
10.12 Item 25) (W/TAG 005)
14
–
Upper baffle (P/O PL 10.12 Item
22, PL 10.12 Item 23)
15
–
Idler roll (P/O PL 10.12 Item 22, PL
10.12 Item 23)
16
–
Idler roll shaft (P/O PL 10.12 Item
22, PL 10.12 Item 23)
17
–
Spring (P/O PL 10.12 Item 22, PL
10.12 Item 23)
18
–
Post fuser jam clearance latch
(REF: PL 10.15 Item 11)
19
–
Inverter sensor (P/O PL 10.12 Item
22) (65-90 ppm) (NOTE)
20
–
Hinge pin (P/O PL 10.12 Item 22,
PL 10.12 Item 23)
21
–
Torsion spring (P/O PL 10.12 Item
22, PL 10.12 Item 23)
22
Upper baffle assembly (65-90 ppm)
(REP 10.7)
23
–
Upper baffle assembly (35-55 ppm)
(REF: PL 10.12 Item 22) (See
NOTE 1) (REP 10.7)
24
Inverter transparency feed kit (W/
TAG 004)
25
Rear gravity gate finger kit (W/TAG
005)
NOTE:
1. For 35-55 ppm speed machines do not have the
inverter sensor.
NOTE:
2. HFSI. To reset the HFSI count, refer to GP 17.
www
MK-Electronic
de