XEROX WorkCentre
3550
Information Assurance Disclosure Paper
11
Ver. 1.3, March 2011
Page
11 of 32
2.3 Fax Module
2.3.1.
Purpose
The embedded FAX service uses the installed embedded fax card to send and receive images over the telephone
interface.
2.3.2.
Hardware
The fax card connects directly to the Main Controller processor card. The fax card does not have its own processor and local
memory but uses the Main processor and reserved Flash memory. The card contains a fax-only modem that supports the
T.30 protocol. If anything other than the T.30 protocol is detected, the modem will disconnect. Internal logical interfaces
maintain separation between Fax and network.
Volatile Memory Description
Type (SRAM, DRAM, etc)
Size
User Modifiable
(Y/N)
Function or Use
Process to Clear:
None
n/a
n/a
n/a
n/a
Additional Information:
Non-Volatile Memory Description
Type (Flash, EEPROM, etc) Size
User Modifiable
(Y/N)
Function or Use
Process to Clear:
Flash
7MB
N
FAX Backup
None
Additional Information:
Table 5 Fax Module memory components
2.4.
Scanner
2.4.1.
Purpose
The purpose of the scanner is to provide mechanical transport of hardcopy originals and to convert hardcopy
originals to electronic data.
2.4.2.
Hardware
The scanner converts the image from hardcopy to electronic data. An optional document handler moves originals
into a position to be scanned. The scanner provides enough image processing for signal conditioning and
formatting. The scanner does not store scanned images. All other image processing functions are in the main
controller.
